Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Sun Odyssey 32i Performance

Sailboat specifications

The Sun Odyssey 32i is a 31’ (9.45m) cruising sailboat designed by Philippe Briand (France). She was built between 2005 and 2008 by Jeanneau (France). The Performance version displays a taller mast and larger sail area.

The Sun Odyssey 32i is as well listed, on Boat-Specs.com, in Deep draft, Shoal draft and Keel and centerboard version (see all the versions compared).

Sun Odyssey 32i's main features

Model
Sun Odyssey 32i
Version
Performance
Hull type
Monohull
Category
Cruising sailboat
Sailboat builder
Sailboat designer
Sailboat range
Country
France
Construction
GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich fiberglass polyester
First built hull
2005
Last built hull
2008
Appendages
Keel : L-shaped keel (with bulb)
Helm
Single helm wheel
Rudder
Single spade rudder
Unsinkable
No
Trailerable
No
EC design category
 iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)

A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5m
B
Standard public price ex. VAT (indicative only)
N/A

Sun Odyssey 32i's main dimensions

Overall length
31’ 6”9.6 m
Hull length
31’9.45 m
Waterline length
28’8.52 m
Beam (width)
10’ 10”3.3 m
Draft
6’ 7”2 m
Mast height from DWL
46’ 11”14.31 m
Light displacement (MLC)
9480 lb4300 kg
Ballast weight
2491 lb1130 kg
Ballast type
Cast iron

Sun Odyssey 32i's rig and sails

Upwind sail area
570 ft²53 m²
Downwind sail area
987 ft²91.7 m²
Mainsail area
266 ft²24.7 m²
Genoa area
305 ft²28.3 m²
Symmetric spinnaker area
721 ft²67 m²
I
 iFore triangle height (from mast foot to fore stay top attachment)
39’ 2”11.95 m
J
 iFore triangle base (from mast foot to bottom of forestay)
11’ 11”3.62 m
P
 iMainsail hoist measurement (from tack to head)
38’ 1”11.6 m
E
 iMainsail foot measurement (from tack to clew)
12’ 2”3.73 m
Rigging type
Sloop Marconi 9/10
Mast configuration
Deck stepped mast
Rotating spars
No
Number of levels of spreaders
2
Spreaders angle
Swept-back
Spars construction
Aluminum spars
Standing rigging
1x19 strand wire continuous

Sun Odyssey 32i's performances

Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
216 ft²/T20.04 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
373 ft²/T34.68 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
197
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
26 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.08 knots

Sun Odyssey 32i's auxiliary engine

Engine(s)
1 inboard engine
Engine(s) power
21 HP
Fuel type
Diesel
Fuel tank capacity
18.5 gal70 liters

Sun Odyssey 32i's accommodations and layout

Cockpit
Closed aft cockpit
Cabin(s)
2
Berth(s)
6
Head(s)
1
Freshwater tank capacity
44.9 gal170 liters
Holding tank capacity
13.2 gal50 liters
Fridge/ice-box capacity
31.7 gal120 liters
Boiler capacity
5.3 gal20 liters
Maximum headroom
6’ 1”1.86 m
Galley headroom
6’1.82 m

Sun Odyssey 32i's saloon

Maximum headroom
6’1.84 m

Sun Odyssey 32i's fore cabin

Maximum headroom
6’ 1”1.86 m
Berth length
6’ 8”2.03 m
Berth width
5’ 2”1.6 m

Sun Odyssey 32i's aft cabin

Maximum headroom
5’ 11”1.81 m
Berth length
6’ 8”2.05 m
Berth width
6’ 1”1.85 m
Have you spotted incorrect data?  You can report it in the forum or contact the webmaster
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more